76 Part Number 80-01111-9 7/10
6. Soak the removed part(s) in a properly mixed
solution.
7. Use a soft-bristle brush or sponge (NOT a wire
brush) to carefully clean the parts.
8. Use the solution and a brush to clean the top,
sides, and bottom evaporator extrusions; the
inside of the ice machine panels; and the entire
inside of the bin.
NOTE: Do not rinse sanitized components.
9. Install the removed parts.
10. Turn on the water and electrical supply.
Wear ru bber gloves an d sa fety g oggles (and/or
face shie ld) whe n han dling Ice Ma chine Clea ner
or Sanitizer.
Solution
Type
Water Mixed With
Cleaner 1 gal (4 l)
16 oz (500 ml)
cleaner
Sanitizer 6 gal (23 l)
4 oz (120 ml)
sanitizer
Do not mi x Cleaner and Sanitizer solu tions
together. It is a viola tion of Fe deral law to use
these solutions in a manner inconsistent with their
labeling.
To Next Page
Loading...
Need help?
General
