Section 4 Maintenance
Part Number 80-1620-3 4-7
1. Water Curtain
A. Gently flex the curtain in the center and remove
it from the right side.
B. Slide the left pin out.
Water Curtain Removal
2. Ice Thickness Probe
A. Compress the hinge pin on the top of the ice
thickness probe.
Ice Thickness Probe Removal
B. Pivot the ice thickness probe to disengage one
pin then the other. The ice thickness probe can
be cleaned at this point without complete
removal. Follow Step C for complete removal.
C. Disconnect the ice thickness control wiring from
the control board.
SV3153
STEP 1
STEP 2
!
Warning
Disconnect the electric power to the ice machine at
the electric service switch box.
SV3135
COMPRESS
HINGE PIN TO
REMOVE
To Next Page
Loading...
Need help?
General