Noncontact Thermometer
Operation Manual
Ⅰ . Safety information
Please read the following information carefully
before using the meter.
Do not clear the meter using solvents.
Safety symbols:
Important information prompt for denger.
Comply with European CE safety standards.
This instrument is compatible with the following standards:
EN61326-1
EN61010-1
EN60825-1
Warning
Do not point laser directly at eye or indirectly off reflective surfaces.
Ⅱ . Cautions
When ambient temperature changes quickly, must wait 30 minutes to balance the the heat of the
instrument before use.
Avoid EMF(electro magnetic fields) from arc weld, induction furnace, ect …
Do not leave the unit on or near high temperature objects.
Keep the instrument clean, and do not get dust into detecting hole.
Ⅲ . Explanation on parts
To Next Page
Need help?
General
