The rst time you take both earphones out of their case they will enter pairing mode.
STEP 1: Open the bluetooth menu on your device.
STEP 2: Select M&D MW08.
PAIRING
MULTI-FUNCTION BUTTON
PULSING INDICATOR LIGHT
To manually activate pairing mode, hold down the multi-function button until
the indicator light starts pulsing/pairing tone is heard.
NOTE: If you are already connected to a device, remove the right earphone
from your ear to avoid activating your voice assistant.
MW08 QUICKSTART
CONTROLS
MULTI-FUNCTION BUTTON
MULTI-FUNCTION BUTTON
1X: PAUSE / PLAY
2X: SKIP FORWARD
3X: SKIP BACK
HOLD: VOICE ASSISTANT
AMBIENT LISTENING MODE
HOLD VOL+ FOR ON/OFF
ACTIVE NOISE-CANCELLING
HOLD VOL- FOR ON/OFF
Select your default ANC and
Ambient settings in the
M&D Connect App
Full
Med
Low
Download the M&D Connect app for the complete M&D experience.
For more information visit masterdynamic.com/support
CALLS/COMMUNICATION INSERTING YOUR EARPHONES
FIT
3 microphones in
each earphone
provide the freedom
to listen or talk using
just 1 earphone.
Your earphones come with medium ear tips attached. For the most
secure t and best acoustics, choose the ear tips that form a seal with
your ear canal.
STEP 1: Tilt the earphone
forward with the ear tip resting
lightly in your ear canal.
STEP 2: Rotate the earphone
down until the ear tip forms a
seal with your ear canal.
EAR TIP OPTIONS
VOL-
VOL+
CASE BATTERY
EARPHONE BATTERY
Earphones charge to 50% in 15
minutes, 100% in 45 minutes
Case charges to 50% in
15 minutes, 100% in 60 minutes
MIC #1
MIC #2
MIC #3
ANSWER/END CALL
XS S M L XL
To Next Page
Need help?
General
Weight and Dimensions
