Troubleshooting
• If the joystick is unresponsive, check that the bow thruster
battery switch is ON. If it is on, check the circuit breaker box to be
certain that it has not tripped.
• If the pump runs when moving the joystick, but no action results,
check that the inlet and outlet valves are open.
• If the joystick, pump and valves are all operational but there is still
no action, check to be certain there is no debris in the inlet screen.
• If the bow thruster still is not operating properly, take the boat to
an authorized MasterCraft dealer because other potential solu-
tions are in areas of the boat not accessible to the consumer.
SALT WATER ANODE
Models
All except ProStar, as part of the Salt Water Package option.
Purpose
If the boat is operated in salt, polluted or brackish waters, even
temporarily, the boat should be equipped with a transom-mounted
aluminum anode to prevent damage to those metal parts coming in
contact with the water.
The aluminum is, by design, self-sacrificing. It is slowly eroded away
by electrolytic action and requires periodic inspection for deterio-
ration. When the aluminum has eroded to approximately one-half
(1/2) of its original size, it must be replaced to continue protection,
or damage to other metal parts may result.
Location
The anode is mounted on the transom.
Operation
There is no operation required. Boat owners should periodically
examine the anode to determine how much erosion has occurred
and consult an authorized MasterCraft dealer to determine the
appropriate time to replace it.
2021MCOwnerManualFINAL.indd 237 8/26/20 1:52 PM
To Next Page
Loading...
Need help?
General
