Version 3.0 2015 IC-MXIC7B-03 Copyright by Indoor Cycling Group GmbH 2015 | www.indoorcycling.com
HOW TO ASSEMBLE THE
INDOOR CYCLE
2
PEOPLE
5. 6.
7.
OPEN THE FLIP LEVER FOR THE HORIZONTAL
ADJUSTMENT AND SLIDE THE HANDLEBARS
TO ITS MOST FORWARD POSITION.
ASSEMBLE THE BOTTOM END CAP.
CHECK THE HORIZONTAL ADJUSTMENT OF THE
HANDLEBARS, WITH THE FLIP LEVER OPENED, FOR
EASE OF MOTION WHEN ADJUSTING.
CHECK THE CLAMPING FORCE OF THE HORIZONTAL
ADJUSTMENT WITH THE FLIP LEVER CLOSED. MAKE
SURE THE HORIZONTAL ADJUSTMENT PERFORMS
SUFFICIENTLY.
ADJUST IF REQUIRED REFERING TO SERVICE
GUIDELINES AVAILABLE ON MANUFACTURER´S
SERVICE WEBSITE OR CONTACT YOUR LOCAL
DISTRIBUTOR.
3MM
HAND TIGHT
8.
CHECK THE VERTICAL ADJUSTMENT, WITH THE FLIP LEVER OPENED, FOR EASE OF MOTION WHEN ADJUSTING.
CHECK THE CLAMPING FORCE OF THE VERTICAL ADJUSTMENT WITH THE FLIP LEVER CLOSED. MAKE SURE THE
VERTICAL ADJUSTMENT PERFORMS SUFFICIENTLY.
ADJUST IF REQUIRED REFERING TO SERVICE GUIDELINES ON AVAILABLE ON MANUFACTURER‘S SERVICE WEBSITE
OR CONTACT YOUR LOCAL DISTRIBUTOR.
9.
To Next Page
Loading...
Need help?
General
