Version 3.0 2015 IC-MXIC7B-03 Copyright by Indoor Cycling Group GmbH 2015 | www.indoorcycling.com
3. Handlebars: To maintain the easy
adjustment of the handlebar posts, the
vertical and horizontal handlebar posts
must be regularly cleaned and lubricated.
To do this, position the handlebars (A) in the
uppermost position, spray the handlebar
posts with maintenance spray and rub
down the entire exterior surfaces including
the horizontal post with a soft cloth.
Clean sweat residues o the contact
surfaces of the horizontal handlebar post (B)
beforehand and if necessary apply a small
amount of lithium/silicone grease.
Also apply some lithium/silicone grease as
required to the clamp mechanism of the ip
lever of the horizontal post (C).
MONTHLY MAINTENANCE:
1. Connecting elements: During the course
of regular maintenance and care procedures,
all bolts, nuts etc. on the indoor cycle must
be checked for rm seating and function,
and parts showing wear or damage (saddle,
pedal teeth, pedals, SPD system) replaced.
PREVENTIVE
MAINTENANCE
1.
A
3.
C
B
To Next Page
Loading...
Need help?
General
