5.3 T5x, T7x, T7xe MODEL ASSEMBLY STEPS
Open Yellow Assembly Bag. Make appropriate wire connections to the
faceplate and then assemble to the console base using item 13-socket head
cap screw, item 23-lock washer, item 16-socket head cap screw and item
23-lock washer. Item 16 is a shorter socket head cap screw and gets
assembled into the holes closest to the running surface. All holes applicable
to this assembly step can be noted by the embossed arrow next to the hole.
Open Red Assembly Bag. Assemble the console base to the console masts
using item 15-button head cap screw and item 14-flat washer. Be sure to
route the console cables down the console mast through the larger opening
in the mast which is closest to the running belt. Make all appropriate wire
connections within the motor compartment.
STEP 6
CHAPTER 5: T5x, T7x, T7xe Treadmill specifications, parts, and assembly Guides
To Next Page
Loading...
Need help?
General
