Dryer Quick Start Guide
Please take a moment to review these valuable tips before using your new
BRAVOS
®
dryer. You have made an exciting and rewarding investment,
and we want to ensure your complete satisfaction.
If you have any questions regarding the installation or use of your dryer,
please refer to the Use and Care Guide. In the U.S., call a Maytag
®
fabric
care expert at 1-800-688-9900; in Canada, call 1-800-807-6777.
Getting Started in 4 Easy Steps:
1.
Clean the lint screen:
The lint screen is located in the dryer door well. Pull the lint screen up to
remove it. Roll lint off the screen with your fingers. Push the lint screen
firmly back into place.
2.
Load the dryer:
Place laundry in dryer and shut door.
3.
4.
Select the Dry Cycle:
Press POWER/CANCEL, then turn the control knob to the desired Sensor or
Timed cycle. Select the drying cycle that matches the type of load you are dry-
ing. With Sensor cycles, press DRYNESS LEVEL to select a dryness level of
Very Dry (some models), More, Normal, Less or Damp. With Timed cycles, press
TEMP LEVEL to select the desired temperature and press the TIME ADJUST
up or down symbols to select the desired drying time. Select desired options.
For a complete description of options, please see the other side of this Quick
Start Guide.
Begin the Dry Cycle:
Press START/PAUSE. The estimated (Sensor Cycle) or actual (Timed) cycle
time (in minutes) will show in the display.
NOTE: If you do not press START/PAUSE within 5 minutes of pressing
POWER/CANCEL, the dryer will automatically shut off.
W10201170A
To Next Page
Need help?
General
