page 10
Ceiling Cassette Indoor Unit
Model MCK010T MCK015T MCK018T MCK020T MCK025T MCK030T MCK040T MCK050T
Cooling capacity(W) 2800 3600 4500 5400 6500 7500 10000 12500
Heating capacity(W) 3200 3900 5000 5900 7200 8000 11000 13500
Power
220V~/50Hz
Noise dB(A) 29 32 38 39 42 45 45 48
W×D×H(mm) 930×930×278 930×930×363
Weight(kg)
26 26 30 30 39.5 39.5 39.5 39.5
Power consumption(W)
26 34 36 42 72 84 110 140
Number of fan
1
Air flow(H m
³/h) 520 600 650 700 1200 1300 1500 1650
Drain
Φ(mm(in)) 20.5(4/5)
Protection Anti-freezing, overheat
Connection
Gas Expanded copper tube
Liquid Expanded copper tube
LiquidΦ(mm(in)) 6.35(1/4) 9.52(3/8) 9.52(3/8)
GasΦ(mm(in)) 9.52(3/8) 12.7(1/2) 15.88(5/8) 19.05(3/4)
Notes:
1. Cooling condition: Indoor D/W bulb Temp. 27/19ºC, outdoor temperature: D/W bulb Temp. 35/24ºC.
2. Heating condition: Indoor D/W bulb Temp. 20/15ºC, outdoor temperature: D/W bulb Temp. 7/6ºC.
Accessories: Heating Coil
Model HWT08-15 HWT18-30 HWT40-50 HWT60
Indoor unit MCC008T MCC010T MCC015T MCC018T MCC020T MCC025T MCC030T MCC040T MCC050T MCC060T
Heating(kW) 3600 3600 4200 6300 6300 7200 8000 12000 12000 13500
Water flow(m
3
/h) 0.31 0.31 0.36 0.54 0.54 0.60 0.67 0.99 0.99 1.11
Air pressure drop(Pa)
7 7 13 12 12 17 23 31 31 26
Water pressure drop(kPa)
2 2 3 6 6 7 9 11 11 17
Net weight
(kg) 9.5 9.5 9.5 11 11 11 11 14 14 15
Rows
2 2 2 2 2 2 2 2 2 2
Note:
1. Testing condition: 60ºC entering water, 50ºC leaving water.
Accessories: Electrical Heater
Model Model of heater Capacity(kW) Power Ampere(A) Intersection surface(mm²)
MCC008T/010T/015T
HDP1.2T08-15 1.2 220V~/50Hz 5.5 1.5
HDP2.4T08-15 2.4 220V~/50Hz 11 2.5
MCC018T/020T/025T/030T
HDP2.4T18-30 2.4 220V~/50Hz 11 2.5
HDP3.6T18-30 3.6 220V~/50Hz 16.5 4
MCC040T
HDP2.4T40 2.4 220V~/50Hz 11 2.5
HDP3.6T40 3.6 220V~/50Hz 16.5 4
MCC040T/050T
HDP4.8T40-50 4.8 380V/3N~/50Hz 10.5 2.5
HDP7.2T40-50 7.2 380V/3N~/50Hz 16 4
MCC060T
HDP5.4T60 5.4 380V/3N~/50Hz 12 4
HDP7.2T60 7.2 380V/3N~/50Hz 16 4
HDP10.8T60 10.8 380V/3N~/50Hz 23.5 4
Notes:
1. Electrical heater power shall be supplied independently, and intersection size shall meet the requirement
of cable.
2. Electrical heater shall fix with indoor units tightly.
3. To select the right fuse to couple with electrical heater.
4. Earth connecting is a must for electrical heater.
To Next Page
Loading...
Need help?
General
