122Interior equipment
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
To return seat bench section to sitting position:
1. Pull lever (1) and raise seat bench section until it
locks in place.
2. Pull lock button (2) up, and unfold seat back to
upright position. Check for secure locking by
pushing and pulling on the backrest. The red
backrest lock indicators at the lock buttons (2) are
not visible in locked position.
3. Pull lever (1) in direction of arrow, and slide seat
bench section rearward to desired position.
4. Install and adjust head restraint.
For installation of head restraints see page 124.
Warning!
Failure to assure that seats are locked into place
could result in an increased chance of injury in an
accident.
Never place hands under seat or near any moving
parts while a seat is being adjusted.
To Next Page
Loading...
Need help?
General
