ments placed on the seats e.g. seat cushions
or child seats. This could cause damage to
the seat surface.
#
Make sure that no objects or docu‐
ments are on the seats when the seat
heater is switched on.
Requirements:
R
The power supply is switched on.
#
Press button 1 repeatedly until the desired
heating level is set.
Depending on the heating level, up to three
indicator lamps will light up. If all indicator
lamps are off, the seat heating is switched
off.
%
The seat heating will automatically switch
down from the three heating levels after 8,
10 and 20 minutes until the seat heating
switches off.
%
If you switch the power supply off and on
again within 20 minutes, the previous setting
of the seat heating for the driver's seat will
remain active.
Switching the seat ventilation on/off
Requirements:
R
The power supply is switched on.
104
Seats and stowing
To Next Page
Loading...
Need help?
General
