EasyManuals Logo
Home>Mercury>Engine>30M

Mercury 30M User Manual

Mercury 30M
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
MAINTENANCE
83
Before servicing any part of the fuel system, stop engine and
disconnect the battery. Drain the fuel system completely. Use an
approved container to collect and store fuel. Wipe up any spillage
immediately. Material used to contain spillage must be disposed
of in an approved receptacle. Any fuel system service must be
performed in a well‑ventilated area. Inspect any completed service
work for sign of fuel leakage.
FUEL LINE INSPECTION
Visually inspect the fuel line and primer bulb for cracks, swelling,
leaks, hardness, or other signs of deterioration or damage. If any
of these conditions are found, the fuel line or primer bulb must be
replaced.
ENGINE FUEL FILTER
Inspect the sight bowl for water accumulation and inspect the filter
element for sediment. Clean the tank and filters as follows.
CLEANING
Cleaning fuel tank
1. Water or dirt in the fuel tank may cause engine trouble.
2. Clean the tank at specified times or after long storage period
(over three months).
Fuel filters are provided inside the fuel tank and at the engine.
1. Unscrew four screws, remove the housing, then clean the fuel
filter.
37711
b
a
a - Filter: Unscrew the
fuel pickup elbow and
then clean it
b - Fuel pickup elbow

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 30M and is the answer not in the manual?

Mercury 30M Specifications

General IconGeneral
BrandMercury
Model30M
CategoryEngine
LanguageEnglish

Related product manuals