EasyManuals Logo

Mercury 4.2 Diesel User Manual

Mercury 4.2 Diesel
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Section 2 - On the Water
90-8M0113987 eng DECEMBER 2015 Page 29
Avoid full‑throttle acceleration from idle speed.
Do not operate at full throttle until the engine reaches normal operating temperature.
Check the engine oil level frequently. Add oil as needed. High oil consumption is normal during the break‑in period.
After the 20-Hour Break-In Period
To help extend the life of your power package, Mercury Marine recommends the following:
Change the engine oil and filter and the transmission fluid at the interval indicated in the Maintenance Schedule. Refer to
Specifications and Maintenance.
Use a propeller that allows the engine to operate at the rated engine RPM when at full throttle with a fully loaded boat.
Refer to Specifications and Maintenance.
Operation at 3/4 throttle setting or lower is recommended. Refrain from prolonged operation at wide‑open throttle RPM.
End of First Season Checkup
At the end of the first season of operation, contact an authorized repair facility to discuss or perform scheduled maintenance
items. If you are in an area where the product is operated continuously, year‑round, you should contact your dealer at the end
of the first 100 hours of operation or once yearly, whichever occurs first.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 4.2 Diesel and is the answer not in the manual?

Mercury 4.2 Diesel Specifications

General IconGeneral
BrandMercury
Model4.2 Diesel
CategoryEngine
LanguageEnglish

Related product manuals