Important
• The splash disk (near the top of the tamper) and lid prevent the tamper from hitting the
blades when the lid is secured properly in the locked position.
• The container should not be more than two-thirds full when the tamper is used during
blending.
• To avoid overheating during blending, DO NOT use the tamper for more than 30
consecutive seconds.
• If the food does not circulate, the machine may have trapped an air bubble. Carefully
remove the measuring cup while making sure the lid stays firmly in place. Release the air
bubble by inserting the tamper through the lid plug opening.
• Holding the tamper straight down may not help the ingredients circulate. If necessary,
point the tamper toward the sides or corners of the container. DO NOT try to force the
tamper deeper into the container.
To Next Page
Loading...
Need help?
General
