Page 9
Operating
Instructions
NOTE
All the pictures in this manual are for illustrative purposes only. The actual shape of
the air conditioner you purchased may be slightly different, but its operation and
functions will be similar.
NOTE
The cool circuit has an automatic 3 minutes time delayed start if the unit is turned
off and on quickly. This prevents overheating of the compressor and possible circuit
breaker tripping.
Air Conditioner Operation
WARNING
To reduce the risk of fire, electrical shock, or injury to people or property, read the
SAFETY PRECAUTIONS before operating this appliance.
To quickly begin operating the air conditioner, follow these steps:
1. Set the thermostat to the lowest number (coldest setting).
2. Set the selector control to the highest COOL setting.
3. Adjust the louver for comfortable air flow (see Air Directional Louvers).
4. Once the room feels colder, adjust the thermostat to the setting you find most
comfortable.
5. Make sure that the air flow inside and outside are not obstructed by anything.
6. This air conditioner is designed to be operated under the following conditions:
Cooling Operation
Outdoor temp.: 18-43°C (64°F ~ 109°F)
Indoor temp.: 17-32°C (62°F ~ 90°F)
NOTES
• The relative humidity of room should be less than 80%. If the unit is used in a
condition with a relative humidity over 80%, there will be condensed water on the
surface of the unit.
• Performance may be reduced outside of these operating temperatures.
Before you begin, thoroughly familiarize yourself with the control panel as shown below
and all its functions, then follow the symbol for the functions you desire. The unit can be
controlled by the unit control panel alone or with the remote controller.
To Next Page
Loading...
Need help?
General
