22
21
Cleaning the Side Brush
Pull to remove the side brushes. Remove any tangled hair, debris, and then
reinstall them.
It is recommended to clean the side brushes every week and replace them
every 6-12 months.
1.
2.
Cleaning the Dustbin and Filter Element
Empty the dustbin after each use.
NOTE
Press dustbin release button to remove
dustbin from robot.
1. Open the top cover of the dustbin
to pour out the dust.
2.
Cleaning the Water Tank
Take the filter out from the dustbin.
Remove debris by tapping the filter
against your garbage bin.
You can clean the filter with water,
but remember to dry it
THOROUGHLY before reinserting
it back into the dustbin.
3. Reinsert the dustbin back in the
robot. It is recommended to clean
the filter element every week and
replace it every 1-3 months.
4.
Once finished mopping, press the water tank release button and pull to remove the
water tank. Detach the mop cloth holder by pulling them apart.
1.
Wash the mopping cloth and dry THOROUGHLY.2.
Open the cover and pour out the remaining water in the water tank.3.
If side brushes are curled, you can remove them and place in warm water (Suggested 30 - 50°C ) for
30 seconds and then let it thoroughly dry.
NOTE
To Next Page
Loading...
Need help?
General
