Midea MAP06S1JWT-B User Manual

24
SHORTCUT Function
Note:
O N /O F F
T E MP
SHO RT
CUT
TIM E R
ON
TIM E R
OFF
MOD E
FAN
LED
SLE EP
SLEEP Function
The SLEEP function is used to decrease
energy use while you sleep (and don’t need
the same temperature settings to stay
comfortable).
Used to restore the current settings or resume
previous settings.
Push this button when remote controller is on,
the system will automatically revert back to the
previous settings including operating mode,
set temperature, fan speed level and sleep
feature (if activated).
By pressing for more than 2 seconds, the
system will automatically store the current
operation settings including operating mode,
set temperature, fan speed level and sleep
feature (if activated).
The SLEEP function is not
available in FAN or DRY mode.
ComfortSense function
The ComfortSense function enables the
remote control to measure the
temperature at its current location. When
using AUTO, COOL, or HEAT functions,
measuring ambient temperature from the
remote control (instead of from the indoor
unit itself) will enable the air conditioner
to optimize the temperature around you
and ensure maximum comfort.
1. Press ComfortSense button to activate
function. The remote control will send
temperature signal to the unit every
three minutes.
2. Press ComfortSense button again to turn
off this function.
C-SENSE

Midea MAP06S1JWT-B Specifications

General

Brand	Midea
Model	MAP06S1JWT-B
Category	Air Conditioner
Language	English