Tips
08
When assembling fried barrel,the sound of metal duckles proves that the assembly is in
place.
Instructions
1. After the machine is powered on, adjust the temperature knob to the 200 ° C position
and the time knob to 3-5 minutes to complete the warm-up operation of the machine.
2. After the preheating is completed, hold the top of the machine with one hand, and pull
the barrel out by holding the handle of the barrel with the other hand. The barrel must
be placed on a stable table.
3. Put the ingredients on the bakware in the fried barrel.
4. Push the fryer into the machine, select the corresponding cooking temperature and
time by the knob, and cook and heat the ingredients.
3
Before placing ingredients, preheat the machine for 3-5 minutes, the cooking effect
will be better.
NOTE
When the drum is not fully advanced, the micro-switch is not triggered, the machine is in
the state of power off the barrel, and it will not work. At this time, you only need to fully
push the drum.
Figure 3
To Next Page
Loading...
Need help?
General
