MCAC-ATSM-2011-12 Air-cooled modular chiller unit 50Hz
7
8).Environmental care
Ecological R410A refrigerant.
Chlorine-free and environmental friendly refrigerant, zero ozone depletion potential.
High density refrigerant, therefore, less refrigerant required.
Leak-tight refrigerant circuit, Brazed refrigerant connections for increased leak-tightness.
9) Economical operation
New design adopts electronic expansion valve precise refrigerant control in wider range. Electronic
expansion valve allows operation at lower condensing pressure, adjustment can be made fast linear
response, making the system more stable output, the indoor temperature more uniform, and enhance
human comfortable.
10).Compact structure
Air cooled modular chiller structure are compact, light weight. The system adopts tube in tube, shell and tube
heat exchanger, not only greatly enhanced the transfer performance, but also reduce the unit weight, the
lightest single module only has 380kg.
The characteristic of unit decided cooling tower is not needed, not only reduced installation costs, but also
resolved the cooling tower generated noise when running.
11).Back up function
When unit is failure
If master unit fails, all the units will stop.
If one slave unit fails, this unit will stop but the others will keep running.
When the master unit fails, any of the slave one can be set as the master unit by manual setting.
When unit is under protection
If master unit’s protection occurs, this unit will stop but the others will keep running.
If slave unit’s protection occurs, this unit will stop but the others will keep running.
( Except PE, P9
protection happen
)
Master Slave
Master Slave
12).Strong micro-computer intelligent control and monitor function.
Optimizing the design of system and using varieties of protection devices, to make the system more safe
and reliable.
13). Superior reliability
System will be more reliable with new type efficient heat exchanger.
To Next Page
Loading...
Need help?
General