MCAC-ATSM-2011-12 Air-cooled modular chiller unit 50Hz
5
2. Features
1). Low ambient temperature cooling function (Only for MGCSL-F30W/RN1 and MGCSL-D30W/RN1)
The ambient temperature is down to -10℃ in cooling mode, the cooling operating temperature up to 52˚C in
tropical model and heating down to -10˚C ambient by added one board (see picture1). Wide ambient
temperature range is selectable by adjustable address between different conditions to meet different
requirements.
Mode Ambient temp.
Cooling
Normally（S8 address OFF）
10~46℃
T condition
10~52℃
※ Low temp. (S8 address ON)
-10~46℃
Heating
-10~21℃
2). Wide range of outlet water temperature (For MGCSL-F(D)30W/RN1 ,MGB-D65W/RN1,
MGB-F250W/RN1)
Cooling: 5~17˚C (Set in factory), 0~17˚C can be available by switch the S5 on PCB, the antifreeze must be
put into pipeline.
Heating: 40~50˚C (Set in factory), 22~50˚C can be available by switch the address.
Mode Outlet water temp.
Cooling(S5 address)
Normally(OFF)
5~17℃
Low water temp.(ON)
0~17℃
Heating(S4 address)
Normally(OFF)
45~50℃
Low water temp. (ON)
22~50℃
3).Built-in hydraulic module (Only for MGCSL-F30W/RN1 and MGCSL-D30W/RN1)
The unit built-in hydraulic module to simplified installation, save space and beautification appearance,
simultaneous effectively reduce installation costs and covering area.
Y-shaped filiter
Fan coil unit
Fan coil unit
Fan coil unit
Fan coil unit
This figure for reference purpose only, please in terms of the design rule for field installation.
Water replenishing valve
Water pump
Water-flow valve
Safety valve
2-way valve
2-way valve
1.5kg<Water replenishing pres<6kg
Flexible joint
Flexible joint
Aux. heater
Thermometer
Manometer
Cutoff valve
auto-air exchanse valve
Flexible joint
Flexible joint
Expansion tank
Double
-pipe
heat
exchanger
Picture1
Picture2
To Next Page
Loading...
Need help?
General