Midea MLH52S7AWW User Manual

17
Washer
Safety
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troubleshooting
PRE WASH
Prewash is an extra wash
before the main wash.
Use it for heavily soiled
clothes or for clothes
with a care label that
recommends prewashing
before washing. Be sure to
add liquid or powder high-
efficiency detergent, or
the proper wash additive
to the prewash dispenser.
PreWash must be selected
prior to pressing Pause/
Add a Garment. The
PreWash feature will fill
the washer with cold
water (adding the prewash
detergent), tumble the
clothes, drain and spin.
Then the washer will run
the selected wash cycle.
EXTRA
RINSE and
PRE WASH
You can lock the controls
to prevent any selections
from being made. Or you
can lock or unlock the
controls after you have
started a cycle.
Children cannot
accidentally start the
washer by touching
buttons with this option
selected.
To lock the washer, press
and hold the Extra Rinse
and Pre Wash buttons for
3 seconds.
To unlock the washer
controls, press and hold
Extra Rinse and Pre Wash
buttons for 3 seconds.
NOTE: The Power button
can still be used when the
machine is locked.
MY CYCLE
To save a favorite cycle,
set the desired setting
for wash cycle, soil level,
spin speed and wash temp
settings and hold down
the My Cycle button for
3 seconds, A beep will
sound to indicate the
cycle has been saved.
To use your custom cycle,
press the My Cycle button
before washing a load.
To change the saved cycle,
set the desired setting and
hold down the My Cycle
button for 3 seconds.
NOTE: When using My
Cycle, wash options cannot
be modified after the cycle
has been started.
NOTE: If you change wash
options with My Cycle
before starting the cycle,
the My Cycle light will
turn off and you will be
returned to the base cycle.

Midea MLH52S7AWW Specifications

General

Brand	Midea
Model	MLH52S7AWW
Category	Washer
Language	English