Cleaning and care
45
Release the upper section with the
holder for the milk pipework from the
dispensing spouts.
Clean all parts thoroughly.
Clean the surfaces of the central
spout and the dispensing spouts with
a damp cloth.
Clean any blockages in the milk
pipework under running water with the
special brush supplied:
Insert the brush in the pipework.
Move it back and forth until all milk
residue has been removed.
Reassembling the central spout
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
Fit the dispensing unit back together.
Refit the dispensing unit onto the
central spout. Press firmly to ensure
the dispensing unit is securely fitted
without any gaps.
Replace the stainless steel cover and
connect the milk pipework if required.
To Next Page
Loading...
Need help?
General
