Cleaning and care
52
Cleaning the milk pipework
using the maintenance
programme
For optimal cleaning results, we
recommend Miele Cleaning Agent for
milk pipework. The Cleaning Agent for
milk pipework has been specially
developed for use with Miele coffee
machines and prevents subsequent
damage.
It is available to order via the Miele
webshop or directly from Miele (see the
end of this booklet for contact details).
The Clean milk pipework maintenance
programme lasts for approx.5minutes.
Touch .
Select Maintenance and touch OK.
The cleaning process cannot be
cancelled. It must be completed
through to the end.
Select Clean milk pipework and touch
OK.
The process will start.
Follow the instructions in the display.
Place milk pipe in cleaning agent will
appear in the display.
Preparing the cleaning solution:
Dissolve the cleaning agent in a
container with 200ml of lukewarm
water. Stir the solution with a spoon
until the powder has fully dissolved.
Carrying out the cleaning process:
Place the container next to the
machine and hang the milk tube in
the solution. Make sure it is placed
sufficiently far into the cleaning
solution.
Touch OK.
Follow the further instructions given
in the display.
The cleaning process is finished at the
end of the rinsing cycle.
Tip: Flush any residual cleaning agent
out of the milk pipework with running
water.