Quick Start Guide
Coffee machine
These short instructions are not a substitute for the operating instructions supplied
with the machine. It is essential to read the operating and installation instructions to
familiarise yourself with how to use the coffee machine before using it for the first
time.
en - GB
M.-Nr. 10 315 210
DESCALING THE MACHINE / TIPS FOR USE
SETTINGS
CLEANING AND CARE
Cleaning and care Descaling the machine Settings
Changing settings
ĺ Touch .
ĺ Select "Settings".
ĺ Select the option you want and change
the setting as required.
ĺ Touch "OK" to save the setting.
Tip: touch to return to the previous
menu.
Option Available settings Notes
Language Deutsch, English and other languages
Country
If you select the wrong language by mistake, you can easily find the Language option by following the
flag symbol.
Time of day Show (Off / On / Night dimming)
Clock format (12h / 24h)
Your choice of display will affect the energy consumption of your coffee machine. A message about
this will appear in the display.
Date
Timer Timer 1 (Switch on at, Switch off at,
Switch off after)
Timer 2 (Switch on at, Switch off at)
For "Switch on at" and "Switch off at", the timer must be activated and at least one day of the week
must be allocated.
Expert mode On / Off
Eco mode On / Off
Lighting Brightness
(Machine switched on or switched off)
Switch off after
Info
System lock On / Off When the system lock is activated, the "Switch on at" option for the timer cannot be selected.
Water hardness Soft, Medium, Hard, Very hard The water hardness level only needs to be set for manual descaling.
Brightness
Volume Buzzer tones
Keypad tone
Cup heating On / Off
Spout adjustment On / Off The height of the central spout cannot be adjusted manually.
Service Evaporate
Demo mode
The "Evaporate" function removes water from the system and should be used if the machine is not
going to be used for a long period of time or has to be moved.
Demo mode is intended for use in showrooms or at exhibitions. Do not activate this setting for
domestic use!
Factory default The following settings will not be reset: Language, Time, Date and Number of drinks dispensed.
You will need one descaling tablet to
descale the machine. The maintenance
programme lasts for approx.12 minutes.
"Descale the machine" appears in the
display.
ĺ Touch "OK".
ĺ Or select "Maintenance" from the main
menu and then select "Descale the
machine".
The descaling process cannot be
cancelled once it has started. The
process has to be carried through to the
end.
The maintenance programme will then
start.
ĺ Follow the instructions in the display.
When "Fill water container with lukewarm
water and descaling solution up to the
symbol and replace it" appears in the
display:
ĺ Fill the water container up to the
symbol with lukewarm water and
drop a descaling tab into the water.
Follow the instructions for the mixing
ratio carefully. It is important that you
do not fill the water container with too
much or too little water. Otherwise the
descaling process will be cancelled
prematurely.
ĺ Replace the water container.
ĺ Follow the instructions in the display.
When "Rinse the water container and fill with
fresh water to the symbol" appears in the
display:
ĺ Remove the water container and rinse
it carefully with clean water. Make sure
that no descaling agent is left in the
water container.
Fill the water container to the symbol
with fresh tap water.
The descaling process is finished at the
end of the rinsing process.
Drinks parameters
You can set the amount of coffee, the
brewing temperature and pre-brewing for
each drink individually.
ĺ Select "Process" from the drinks menu
using the arrow sensor.
ĺ Touch "Change drink" and select a drink.
ĺ Touch "Drink parameters".
ĺ Select "Amount of coffee", "Brew
temperature" or "Pre-brewing".
ĺ Select the setting you want and touch
"OK".
ĺ Touch "OK" again to save your changed
settings.
Portion size
You can adjust the amount of water for all
coffee drinks, hot water and all types of
tea.
For coffee drinks with milk you can also
set the amount of milk or milk froth to suit
your personal taste.
ĺ Place the cup you want under the
central spout or hot water spout.
ĺ Select "Process" with the arrow
sensor.
ĺ Touch "Change drink" and select a drink.
ĺ Touch "Portion size".
The drink will be made and "Save" will
appear in the display as soon as the
minimum dispensing amount is reached.
ĺ When the cup is filled to the level you
want, touch "Save".
If you want to change the portion size for
coffee drinks made with milk or hot water,
the ingredients (components) which make
up the drink will be saved one after the
other while the drink is being made.
Expert mode
In Expert mode you can change the
amount of coffee and the portion size
while the drink is being made.
The setting will not be saved and will only
apply for the current drink.
Activate Expert mode from the "Settings "
menu.
The parameters can only be changed
when the respective ingredient is being
processed while the drink is being made.
ĺ Touch the segments and adjust the
indicator (small triangle) as you wish.
Cleaning the central spout with
integrated cappuccinatore
If the central spout is in the uppermost
position it cannot be dismantled. The
central spout must be moved into the
maintenance position to do this.
ĺ Touch for three seconds.
ĺ Pull the stainless steel cover forwards
and off and then pull the dispensing unit
off.
ĺ Twist upper section with the holder
for the milk pipework and pull it off.
Then pull Y-shaped piece off. Release
spouts .
ĺ Clean all parts thoroughly.
ĺ Clean the surfaces of the central spout
with a damp cloth.
Tip: if necessary clean the milk pipework
under running water with the brush
supplied.
ĺ Reassemble the dispensing unit. Push
the spouts firmly back onto the
dispensing unit.
Make sure that all parts are tightly
connected to one another.
ĺ Push the dispensing unit back into the
central spout and replace the stainless
steel cover.
ĺ Touch "OK".
Cleaning the brew unit by hand
Clean the brew unit by hand only
under hot running water. Do not use
washing-up liquid or any other
cleaning agent..
ĺ Open the machine.
ĺ Press the button under the handle of the
brew unit and, whilst doing so, turn
the handle clockwise.
ĺ Carefully pull the brew unit out of the
coffee machine.
When you have removed the brew
unit, do not change the position of the
handle on the brew unit.
ĺ Wipe any remaining coffee off the filters
(see arrows). One filter is located in the
funnel and the other to the left of the
funnel.
ĺ Dry the funnel to prevent ground coffee
sticking to it the next time a coffee is
made.
ĺ Carefully clean the inside of the coffee
machine.
ĺ Push the brew unit back into the coffee
machine, making sure it goes in straight.
ĺ Press the button under the handle on the
brew unit and, whilst doing so, turn
the handle anti-clockwise .
Degreasing the brew unit
You need 1 Miele cleaning tablet to
degrease the brew unit. The process takes
approx. 12 minutes.
The cleaning process cannot be
cancelled once it has started. The
process has to be carried through to the
end.
ĺ Select "Maintenance" from the main
menu and then "Degrease the brew unit".
The maintenance programme will then
start.
ĺ Follow the instructions in the display.
When "Place a cleaning tablet in the ground
coffee drawer and then close it" appears in
the display:
ĺ Open the machine.
ĺ Turn the handle to the left to remove the
ground coffee drawer.
ĺ Place the cleaning tablet in the
integrated coffee scoop and push the
ground coffee drawer into the ground
coffee chute. Turn the handle to the right
to close the ground coffee chute.
ĺ Follow the further instructions given in
the display.
DoubleShot
Cancel
Grinding
Tips for use
To Next Page
Need help?
General
