Miele Con@ctivity 2.0-Stick User Manual

,
The radio module (white box) must not be screwed to
the underside of the hob or to an oven or cooker!
The cable of the radio module EI 7800 must not come into
contact with the underside of the hob, oven, cooker, or
any other built-in appliance.
Position the radio module so that it is as far as possible from
any metal components. Ensure that no metal components, or
as few as possible, are present in the transmission path bet-
ween the radio module and the cooker hood antenna.
^ Secure the radio module underneath the work surface in
such a way that the Con|ctivity stick can be plugged in
easily.
^ Disconnect the hob from the mains electricity supply.
^ Plug in the Con|ctivity stick.
^ Reconnect the appliance to the electricity supply.
^ Sign the hob on as described in the operating and installa-
tion instructions for the hob.
If a connection cannot be established after signing on, this
could be due to a "dead spot". Try placing the radio modu-
le in another position.
Miele hereby declares that this Con|ctivity 2.0 Stick
(EI 7800) is in compliance with the standard requirements
and other relevant regulations of Directive 1999/5/EC.
A full declaration of conformity is available from Miele. Please
see back cover of this booklet for contact details
en
6

Miele Con@ctivity 2.0-Stick Specifications

General

Brand	Miele
Model	Con@ctivity 2.0-Stick
Category	Control Unit
Language	English