Miele G 575 User Manual

Dealing with Minor Faults
With the aid of the following explan-
atory notes, minor faults can be cor-
rected without contacting the Miele
Service Department.
Any work on the electrical com-
ponents of the appliance should —
only be carried out by a suitably
qualified and competent person.
Faults/possible causes
The dishwasher does not start?
® The door is not properly closed.
® The plug is not properly inserted.
@ Jhe tuse is defective.
The dishes are not clean
@ The dishes are incorrectly loaded.
@ The correct amount of detergent
Was not used,
@® Not enough water in the wasn
cabinet:
— The stopcock/faucet has not
been opened fully.
- Filter in the water
blocked.
@ Water pressure is too low.
(To check the water level, see p.
29).
@ Filters in the wash cabinet are not
clean (see p. 25).
@ Spray arm jets are blocked (see p.
26).
inlet is
@® Spray arms are hindered by
dishes stacked too high in the
baskets.
a0
White residue on cutlery and
dishes
@® Not enough Rinse Aid,
Water in the wash cabinet after
completion of program
@® The outlet hose is kinked.
@ The drain pump or the non-return
valve is blocked,
To clean the drain pump or the non-
return valve see p, 27.
Should you still have difficulties,
please contact your MIELE Dealer or
the MIELE Service Department (see
back cover for address) and give
Type and Madel of appliance. This
information can be found on the data
plate on inside of door.

Miele G 575 Specifications

General

Brand	Miele
Model	G 575
Category	Dishwasher
Language	English