Problem solving guide
71
Door release
Problem Cause and remedy
The following fault is in-
dicated via the display:
Before rectifying the problem:
Switch the dishwasher off.
Fault F33 The door does not open automatically.
There may be a technical fault.
Open the door manually (see “Before using for the
first time” chapter, “Opening the door” section)
and switch the dishwasher off and then back on
again.
If the same fault message appears again, call
Miele Service.
The door locking pins do not retract after the door is
opened.
There may be a technical fault.
Switch the dishwasher back on.
If the same fault message appears again, call
Miele Service.
To Next Page
Loading...
Need help?
General
