Miele G 7319 User Manual

Guide to the appliance
19
Display functions
The display is used to select or set the
following:
- further programmes
- the timer
- the Settings 
The display can show the following:
- the programme stage
- the estimated time left for the
programme to run
- the energy and water consumption
(EcoFeedback)
- any relevant fault messages and
information
To save energy, the dishwasher
switches off after a few minutes if you
do not press any sensors during this
time.
Touch the sensor to switch the
dishwasher back on.
The OKsensor is used to confirm a
message or setting and also to move to
the next menu or another level.
Under Further programmes/Settings
a scroll bar will appear in the right of
the display. This offers further options.
These options can be viewed using the
sensors.
You can alter the dishwasher’s controls
to suit changing requirements in the
Settings menu (see “Settings”).
The option that is selected will have a
tick next to it.
To exit a submenu use the
Backsensor.
If you do not press any sensors for
several seconds, the display will revert
to the previous menu. You will then
have to enter your settings again.
These operating instructions apply to
several different dishwasher models of
different heights.
The different dishwasher models will
be named as follows:
normal = dishwasher measuring
80.5cm high (built-in appliance)
or 84.5cm high (freestanding
appliance)
XXL = dishwasher measuring 84.5cm
high (built-in appliance).

Miele G 7319 Specifications

General

Brand	Miele
Model	G 7319
Category	Dishwasher
Language	English