fold here fold here fold here fold here fold here
fold herefold herefold herefold herefold here
fold here
fold here
Cooking programmes (maximum cook-
ing time 11 hours and 59 minutes) can be
switched on or off automatically.
For example:
The time is now 11:15 am.
You want a roast with a cooking duration
of 90 minutes to be ready by 13:30.
Setting a cooking duration
ĺ Place the food in the oven.
ĺ Select the required oven function and
the temperature.
ĺ Press repeatedly until starts flash-
ing.
ĺ Confirm with OK.
appears in the display and the
hours will flash.
ĺ Use or to set the hours.
ĺ Confirm with OK.
The hours are saved and the minutes will
flash.
ĺ Use or to set the minutes.
ĺ Confirm with OK.
The cooking duration is now saved.
The symbol indicates a cooking dura-
tion has been set.
If no finish time has been set, the cooking
time will count down in minutes, and the
last minute in seconds.
Setting a finish time
ĺ Press repeatedly until starts flash-
ing.
appears in the display (= current
time of day + cooking duration = +
).
ĺ Confirm with OK.
The hours will flash.
ĺ Use or to set the hours.
ĺ Confirm with OK.
The hours are saved and the minutes will
flash.
ĺ Use or to set the minutes.
ĺ Confirm with OK.
The finish time is now saved and ap-
pears in the display.
As soon as the start time
( - = ) is reached, the oven
heating, lighting and cooling fan will
switch on.
Settings overview
Settings Status
Buzzer
volume
to
*
The buzzer is switched off.
The buzzer is switched on.
You can adjust the volume. When you select a status
you will hear the corresponding buzzer.
Clock format
*
The time of day is shown in the 24-hour format.
The time of day is shown in the 12-hour format.
If you change the clock after 1:00pm from a 12-hour clock to a 24-hour
clock you will need to update the hour accordingly.
System lock
for the oven
*
The system lock is switched off.
The system lock is switched on. appears in the display.
The system lockprevents the oven from being used unintentionally, for
example by children. The system lock remains active even after a pow-
er cut.
Keypad tone
*
The keypad tone is switched off.
The keypad tone is switched on.
* factory setting
Changing settings
Your appliance is supplied with a number
of factory default settings.
A setting is changed by altering its sta-
tus .
ĺ Turn the function selector to0.
ĺ Press and hold until appears.
ĺ If you want to change another setting,
press or repeatedly until the rele-
vant number appears.
ĺ Confirm with OK.
The setting is selected and the current
status appears, e.g. .
To change the status:
ĺ Press or repeatedly until the re-
quired status appears in the display.
ĺ Confirm with OK.
The selected status is saved and the set-
ting appears again.
To change further settings, proceed in the
same way.
If you do not want to change any further
settings:
ĺ Wait approx. 15 seconds until the time
of day appears.
Most minor problems which may occur during daily operation, you can remedy yourself. The following guide is intended to help you do this.
Contact Miele if you cannot identify the cause of a problem or resolve it yourself.
Problem Cause Remedy
The display is dark. There is no power to the oven. Check if the circuit breaker has tripped.
If it has, contact a qualified electrician or Miele.
The oven does not heat up. – You have only selected an oven function or a temperature.
– The system lock is switched on.
– There is no power to the oven.
– Select both a function and a temperature.
– Switch off the system lock (see "Settings").
– Check if the circuit breaker has tripped.
If it has, contact a qualified electrician or Miele.
is flashing in the display.
There has been a power cut. Reset the time of day (see "Using for the first time").
appears unexpectedly in
the display and is flashing
at the same time. The buzzer
might be sounding.
The oven has been operating for an unusually long time
and this has activated the safety switch-off function.
Turn the function selector to 0.
The oven is now ready for use again immediately.
appears in the display.
A fault has occurred that you cannot resolve. Call Miele.
A noise can be heard after a
cooking process.
The cooling fan is switched on. It switches off automatically after a certain period.
Rust-like spots appear on cat-
alytic surfaces.
The catalytic cleaning process does not remove spices,
sugar and similar deposits.
Take the catalytic enamelled parts out of the oven and remove this type of soiling
with a mild solution of hot water and washing-up liquid applied with a soft brush.
Allow the parts to dry and then carefully reassemble them.
Cakes and biscuits are not suf-
ficiently baked after follow-
ing the times given in the bak-
ing chart.
– The ingredient quantities used are different from those
given in the recipe.
– A different temperature from the one given in the recipe
is used.
– Check whether there has been a change to the recipe. The addition of more liquid
or more eggs makes a moister mix which would take longer to cook.
– Select the temperature required for the recipe.
Browning is uneven. – The material or colour of the baking tin is not suitable for
the oven function.
– The wrong temperature or shelf level was selected.
– With Conventional Heat light coloured, shiny tins are less suitable. Use matt,
dark coloured baking tins.
– If the unevenness is pronounced, check whether the correct temperature and shelf
level have been selected.
There will always be a slight unevenness.
The oven lighting does not
switch on.
– The halogen lamp is faulty and needs replacing.
– You have selected Gentle Bake .
– Replace the lamp with a new halogen bulb (see "Operating and installation instruc-
tions").
– The oven lighting does not switch on with this function.
The FlexiClip telescopic run-
ners (if present) do not push in
or pull out smoothly.
The bearings in the FlexiClip telescopic runners are not
sufficiently lubricated.
Lubricate the bearings with the special Miele lubricant.
Only the special Miele lubricant is designed to withstand the high temperatures in
the oven. Other lubricants may harden and stick to the FlexiClip runners when they
are heated.
The special lubricant is available from Miele.
Display
Depending on the position of the function
selector and/or which button is pressed,
the following symbols will appear:
Symbols in the display/
allocated function
Minute minder Any
Duration
Oven
function
Finish time
Temperature indica-
tor light
Time of day
0
Settings
Status
System lock
You can only set or change a function if the
function selector is in the correct position.
Sensors
Sen-
sor
Use
– Highlighting functions
– Reducing times
– Calling up settings
– Changing the status of a
setting
– Highlighting functions
– Increasing times
– Changing the status of a
setting
OK – Calling up functions
– Saving set times and adjust-
ed settings
– Calling up set times
Changing the time of day
The time of day can only be changed
when the function selector is at 0.
ĺ Turn the function selector to0.
ĺ Press repeatedly until starts flash-
ing.
ĺ Confirm with OK.
The hours will flash.
ĺ Use or to set the hours.
ĺ Confirm with OK.
The hours are saved and the minutes will
flash.
ĺ Use or to set the minutes.
ĺ Confirm with OK.
The time of day is now saved.
After a power cut, the time of day needs
to be re-entered.
Using the minute minder
Setting the minute minder
The minute minder can be used to time
any activity in the kitchen (for a maximum
of 99 minutes and 59 seconds).
For example:
6minutes and 20 seconds
ĺ Press repeatedly until starts flash-
ing.
ĺ Confirm with OK.
appears in the display and the min-
utes will flash.
Useful tip: Press twice to set the max-
imum duration value of for the min-
utes.
ĺ Use or to set the minutes.
ĺ Confirm with OK.
The minutes are saved and the seconds
will flash.
ĺ Set the seconds using or .
ĺ Confirm with OK.
The minute minder is saved and will count
down in seconds.
The symbol indicates that the minute
minder has been set.
ĺ When the minute minder time has
elapsed, press OK.
Changing or deleting times
Changing times ( or )
You can change the times by calling up
the corresponding function.
Use or to change first the left and
then the right numeric block. Press OK af-
ter each change to confirm.
The changed time is saved.
Deleting times ( or or )
ĺ Press or repeatedly until the rele-
vant symbol starts flashing, e.g. .
The left numeric block will flash.
ĺ Press or repeatedly until two lines
appear.
ĺ Confirm with OK.
Four lines appear:
ĺ Confirm with OK.
The set time for the selected function is
deleted.
Depending on the function:
– The oven heating, lighting and cooling
fan will switch on (cooking duration).
– The set cooking duration starts count-
ing down (finish time ).
The time of day appears if no cooking du-
ration or minute minder have been set.
To delete the settings for the cooking
duration and finish time: Turn the
function selector to 0.
Switching cooking programmes on and off automatically
Quick Start Guide
H2601B, H2661B
These short instructions are not a substitute for the Operating and installation
instructions. It is essential to familiarise yourself with the oven before using it for the
first time. Please read the Operating and installation instructions carefully and pay
particular attention to the Warning and Safety Instructions.
en – AU, NZ M. No. 10 864 580
To Next Page
Need help?
General
