Programme options
55
Timer
The timer gives you several options
for starting a programme at a later time.
You can set the start time or the finish
time of a programme. You can also use
the EcoStart or SmartStartfunctions to
benefit from cheaper electricity tariffs at
night.
With manual detergent dispensing,
the detergent can clump together if
the detergent compartment is not
dry, and it may not be fully rinsed
out.
When using the timer function, make
sure that the detergent compartment
is dry before adding detergent. Wipe
dry with a cloth first, if necessary.
Do not use liquid detergents. These
can leak out.
Danger to health due to
detergent.
To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the
programme, i.e. before you activate
the timer. Use the safety lock to
secure the dishwasher door.
Activating the timer
Switch the dishwasher on using the
sensor control.
The Startsensor control flashes.
Select the programme you want to
use.
Touch the sensor control.
The sensor control lights up.
You can use the sensor controls to
choose between the Start at, Finish at
and EcoStart functions, or SmartStart if
applicable.
Confirm selection of the function you
want with OK.
The last time set for the timer will be
displayed and the hour number block
will be highlighted.
Enter the time you want for the timer
using the sensor controls and
confirm with OK.
If, while you are setting the time, you do
not apply any settings for several
seconds, the display will revert to the
previous menu. You will then have to
enter your settings again.
After you have activated the timer, all
the displays will switch off after a few
minutes to save energy.
To switch the display back on for a
few minutes, press the sensor
control.
You can also activate a timer via the
Miele@mobile app.
To Next Page
Loading...
Need help?
General
