Migatronic AUTOMIG User Manual

8
INITIAL OPERATING
Mains connection
It is important to ensure that the mains supply voltage is in accordance with the voltage to which the machine
is built. If the machine can be adjusted for use on several different voltages then the machine must be checked
to confirm that it has been set to the correct voltage.
Connection of gas bottle
Use only gas bottles with a max. height of 100 cm. If larger bottles are used the machine may tip over.
Configuration
MIGATRONIC disclaims all responsibility for damaged cables and other damages related to welding with
under sized welding torch and welding cables measured by welding specifications e.g. in relation to per-
missible load.
TECHNICAL DATA
We reserve the right to changes
Type Aut omig
181
Aut omig
183
Aut omig
221
Aut omig
223
Aut omig
231
Aut omig
271
Aut omig
273
Units
Current range 30-160 20-180 20-180 20-200 20-200 20-250 20-250 A
Voltage adjustment 4 7 7 10 11 9 10
Duty cycle, 100% 40 65 60 105 85 110 140 A
Duty cycle, 60% 50 85 75 125 105 150 165 A
Duty cycle, 35% 60 110 90 150 145 190 200 A
Duty cycle, 30% 155 A
Duty cycle, 20% 230 A
Duty cycle, 14% 150 A
Duty cycle, 15% 200 A
Duty cycle, 6% 160 A
Open circuit voltage 19-33 14-30 14-41 14-30 17-47 14-54 15-34 V
1
Mains voltage
230 400 230 400 230 230 400 V
Fuse
10 10 16 10 16 35 10 A
Mains current, effective
4.3 2.5 11.5 4.0 14.7 21.2 5.9 A
Mains current, max.
17.4 5.7 30.8 7.3 38 47.5 10,0 A
Consumption, 100%
0.7 1.3 1,7 2.3 2.3 2.8 3.4 kW
Consumption, open circuit
<10 <10 <10 <10 <10 <10 <10 W
Efficiency
0.85 0.84 0.85 0.85 0.85 0.80 0.82-0.84
Wire dimension 0.6-0.8 0.6-1.0 0.6-1.2 0.6-1.2 0.6-1.2 0.6-1.2 0.6-1.2 mm
Wire reel capacity 5-15 5-15 5-15 5-15 5-15 5-15 5-15 kg
Wire speed 2-12 2-12 2-12 2-14 2-12 2-15 2-15 m/min
2
Spot welding time 0.15-2.5 0.15-2.5 0.15-2.5 0.15-2.5 0.15-2.5 0.15-2.5 sec.
2
Stitch welding time 0.15-2.5 0.15-2.5 0.15-2.5 0.15-2.5 0.15-2.5 0.15-2.5 sec.
Burn-back 0.05-0.5 0.05-0.5 0.05-0.5 0.05-0.5 0.05-0.5 0.05-0.5 0.05-0.5 sec.
3
Application class S S S S S S S
4
Protection class IP21 IP21 IP21 IP21 IP21 IP21 IP21
Standards
EN/IEC60974-1
EN50199
EN/IEC60974-1
EN50199
EN/IEC60974-1
EN50199
EN/IEC60974-1
EN50199
EN/IEC60974-1
EN50199
EN/IEC60974-1
EN50199
EN/IEC60974-1
EN50199
Dimensions, lxwxh 72x38x70 72x38x70 72x38x70 72x38x70 72x38x70 90x44x71 72x38x70 cm
Weight 52 57 54 64 54 71 66 kg
1
Delivery for other mains voltages is possible
2
The functions 4-times, spot and stitch welding can only be found on some machine versions
3
Meets the demands made for machines which are to operate under special working conditions
4
This machine is designed for indoor operation and meets the requirements of protection class IP21.

Migatronic AUTOMIG Specifications

General

Brand	Migatronic
Model	AUTOMIG
Category	Welding System
Language	English