Pages / Quick Guides
Quick Guide - hAP ac
EN - English - Quick Guide:
This Quick Guide covers models: RB962UiGS-5HacT2HnT (hAP ac).
This is a wireless network device. You can find the product model name on the case label (ID).
Please visit the user manual page on https://mt.lv/um for the full up to date user manual. Or scan the QR
code with your mobile phone.
The most important technical specifications for this product can be found on the last page of this Quick
Guide.
Technical specifications, brochures, and more info about products at https://mikrotik.com/products
Configuration manual for software in your language with additional information can be found at https://mt.lv/help
If you need help with configuration, please seek a consultant https://mikrotik.com/consultants
First steps:
Connect your Internet cable to port 1, and local network devices to other ports.
Set your computer IP configuration to automatic (DHCP).
Wireless access point mode is enabled by default (or, for some models, check user and wireless passwords on the
sticker).
Open network connections on your PC, mobile phone, or other device and search for MikroTik wireless network
and connect to it.
Once connected to the wireless network, open http://192.168.88.1 in your web browser to start configuration, since
there is no password by default, you will be logged in automatically.
We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version
to ensure the best performance and stability.
Choose your country, to apply country regulation settings, and set up your password on the screen that loads.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be
familiar with standard practices for preventing accidents. The installer should be familiar with network structures,
terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original
packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The
installer is responsible for making sure, that the Installation of the equipment is compliant with local and national
electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot
environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use
this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power
adapter from the power outlet.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
To avoid contamination of the environment, separate the device from household waste and dispose of it in a safe
manner, for example, in designated areas. Become familiar with procedures for properly transporting the
equipment to designated collection points in your area.
This device needs to be upgraded to RouterOS v7.6 or the latest stable version, to ensure compliance with local
authority regulations!
It is the end users responsibility to follow local country regulations, including operation within legal frequency
channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All
MikroTik radio devices must be installed according to instructions.
To Next Page
Need help?
General
Weight and Dimensions
