1.
2.
3.
LHG 60G
The LHG 60G device works in the 60 GHz wireless spectrum, the operating temperature of these devices is from -40 up to +70 . Each device has one °C °C
gigabit Ethernet port and can be powered with PoE.
Quickstart
Assemble unit. Please see the section.Assembly
Open the Ethernet door to connect an Ethernet cable to the Ethernet port, connect the other end of the Ethernet cable to the included PoE injector.
Plug the PoE injector into your network switch or ISP internet outlet.
Plug the included power supply into the PoE injector to start up the device.
Mount on the mast or pole. Please see the section.Mounting
Set LAN computer IP configuration to (DHCP).
automatic
Once connected to the wireless network, open in your web browser to start configuration, user name: Admin and there is no https://192.168.88.1
password by default.
We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best
performance and stability.
Choose your country, to apply country regulation settings and set up your password on the screen that loads.
Assembly
Attach the two legs to the LHG case.
Snap the assembled LHG unit to the grid in the appropriate locations.
Fix the legs in place with two self thread screws (Use Phillips screwdriver PH2).
Mounting
Attach the mounting assembly to the back of the device with four provided screws. For more details please visit https://i.mt.lv/cdn/rb_files
/Ilustrated_mounting_guide_for_LHG-180704095554.pdf
To Next Page
Need help?
General
