To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee PD 705 and is the answer not in the manual?
General| Chuck type | Keyless |
|---|---|
| Hammer drilling | Yes |
| Torque (max) | 15 N⋅m |
| Idle speed (max) | 3000 RPM |
| Impact rate (high speed) | 48000 bpm |
| Drilling diameter in wood (max) | 30 mm |
| Drilling diameter in steel (max) | 13 mm |
| Drilling diameter in stone (max) | 16 mm |
| Drilling diameter in concrete (max) | 15 mm |
| Input power | 705 W |
| Cable length | 4 m |
| Power source | AC |
Weight and Dimensions| Weight | 1900 g |
|---|
Typically, the A-weighted noise levels of the tool are specified.
Vibration total values (triaxial vector sum) determined according to EN 60745.
Specific safety precautions for drill operation, including hearing protection.
General safety practices, protective equipment, and safe working environment.
Guidelines for connecting the tool to the power supply safely.
