SLIDE DESCRIPTION
INSTRUCTORS NOTES
These Instructor Notes are produced to assist instructors in preparing for the
F3 Operator Training Course. They are provided as a guide and are not
intended to be prescriptive. They should be used in combination with the
information contained in the F3 Operations Manual and Field Guide.
The confirmation of a student’s ability to operate the F3 will be achieved
through a series of performance objectives completed after each lesson.
Personnel attending the course will be required to pass an outdoor operator
confirmation exercise to qualify as a proficient operator on the equipment.
One
INTRODUCTION
The instructor will provide a short welcome and brief the students on the
course. This can include some background information on Minelab and its
countermine product range.
Students will be organized into pairs and issued one F3 mine detector per
pair.
Students will complete course registration administration as required.
Two
COURSE OUTLINE
The Minelab F3 Operator Training Course includes lectures and practical
sessions. The course is conducted over two to three days (depending on
language translation requirements) and consists of the following lessons:
• Introduction
• LESSON 1 – General description and preparation
• LESSON 2 – Functional description
• LESSON 3 – Operating procedures
• LESSON 4 – Care & Trouble Shooting
• Outdoor training
• Operator Confirmation Exercise
• Award of Course Certificates
To Next Page
Loading...
Need help?
General
