9. Press key and the controller will collect data.
10. Select Mode 08 and 10 using (F1 and F2) keys
11. Select the Static pressure according to model listed in the table below. (F3 and F4) keys
Static Pressure settings for applicable units below
PEA-RP(M)100-140GAA
PEAD- RP(M)71-140JAA
PEA-RP140-200WJA
SEZ-KD-VAQ
1. Press key to acknowledge. Controller will send data to the indoor unit.
2. Press the return key twice the display will say “exit function settings please wait”
3. To return to the home screen, keeping pressing the return key.
To Previous Page
Loading...
Need help?
General
