Job Name: Location:
Drawing Reference: Schedule No.
System No.: Date:
• R410A refrigerant
• Seven sizes from 6,000 to 30,000 Btu/h
• Powerful airflow (CFM)
• Compact, lightweight, shiny-white, flat-panel design
• Quiet operation
• Multiple fan-speed settings
• Intake grille filter is easily removed for cleaning
• Built-in receiver is standard
Model: PKFY-P08NHMU-E2
GENERAL FEATURES
SPECIFICATIONS
Capacity*
Cooling…………………………………………….….8,000 Btu/h
Heating…………………………………………….….9,000 Btu/h
Power
Power Source………………..........208 / 230V, 1-phase,
60Hz
Power Consumption
Cooling…………………………………………….………0.03 kW
Heating…………………………………………….………0.03 kW
Current
Cooling……...................................................……………0.30 A
Heating……...................................................……………0.30 A
Minimum Circuit Ampacity (MCA)……………….…..……...0.38 A
Maximum Overcurrent Protection (MOCP) Fuse..….......…..15 A
External Finish……………...….………Munsell No. 1.0Y 9.2 / 0.2
External Dimensions
Inches……………………………11-5/8 H x 35-3/8 W x 9-13/16 D
mm……………………………………….295 H x 989 W x 249 D
Net Weight
Unit………………..…...…………
…..................29
lbs. / 13 kg
Coil Type………………...........................................….Cross Fin
(Aluminum Plate Fin and Copper Tube)
Fan
Type x Quantity………………..…………...Line Flow Fan x 1
Airflow Rate (Low-Mid1-High)......................320 - 370 - 423 CFM
Motor
Type………..………..………..…One-phase
Induction Motor
Output………..………..………..………..………..….0.030 kW
Air Filter..…………………………….Polypropylene Honeycomb
Refrigerant Piping Dimensions
Liquid (High Pressure)……............…1/4" / 6.35 mm (Flare)
Gas
(Low Pressure
)………………..…1/2" / 12.7 mm (Flare)
Drainpipe Dimension……............……...…….I.D. 5/8" / 16 mm
Sound Pressure Levels
Low-Mid1-Mid2-High….………….........….34 - 39 - 43 dB(A)
OPTIONS
□ External Heat Adapter……………………....….PAC-YU25HT
* Cooling / Heating capacity indicated at the maximum value at
operation under the following conditions:
Cooling: Indoor 80°F (27°C) DB / 67°F (19°C) WB, Outdoor 95°F
(35°C) DB
Heating: Indoor 70°F (21°C) DB, Outdoor 47°F (8°C) DB / 43°F (6°C) WB
Note: Ventilation air: Providing suf ficient ventilation air is an impor-
tant part of every building design. ASHRAE Standard 62 provides
the minimum ventilation air requirement. Also, check local codes.
Notes:
• IT Terminal plug
To Next Page
Need help?
General
