EasyManuals Logo

Mitsubishi Electric WD-73C9 Replacement

Mitsubishi Electric WD-73C9
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Page 16
MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737
WD-65837 / WD-73837 / WD-82837
SCREEN REPLACEMENT 60”, 65” & 73” Models
Screen Assembly Removal and Replacement
1) Open the front control panel door. (V41+ Only) Pull away Speaker Covers followed by Center Escutcheon.
2) Remove three screws (A) (two screws WD-73837).
3) Remove screws (B) around the rear edge of the screen betzel.
NOTE: Leave one screw secure at the top. Then support the assembly to prevent it from falling
while removing the remaining screw.
4) During re-assembly replace screws in their original locations.
A
DOOR
B
B
B
B
B
73 INCH
B
B
B
B
B
65 INCH
B
B
B
B
B
60 INCH
SPEAKER COVERS
(ORNAMENT LEFT & RIGHT)
CENTER ESCUTCHEON
(ORNAMENT CENTER)
V41+

Other manuals for Mitsubishi Electric WD-73C9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi Electric WD-73C9 and is the answer not in the manual?

Mitsubishi Electric WD-73C9 Specifications

General IconGeneral
BrandMitsubishi Electric
ModelWD-73C9
CategoryTV
LanguageEnglish

Related product manuals