110
PTZ camera setting
You can make settings for controlling each of connected
cameras.
RS232C
integral camera
RS422
integral camera
PTZ camera
Recorder
Step
1 Make detailed settings for the connected
cameras.
[Protocol]: You can set the type of the camera
connected.
[Port]: You can set the port to output control signal.
The port is automatically selected according to the
input of the camera.
[ID]: You can set the address of the camera to be
controlled. Set the ID same as that of the camera.
[Reverse]: You can reverse the panning/tilting
direction depending on the installation condition.
Tips
• Operation of the camera may become impossible for
some reason such as a specification change of the
camera. In addition, some functions may become
invalid.
• Operations or functions performed with this recorder
are simplifi ed ones. They are not equivalent to those
of special control devices.
Various settings (continued)
Setup menu
To Next Page
Loading...
Need help?
General
