7-70
Vehicle care and maintenance
7
Vanity mirror light (if so equipped)
N00952800077
ECLIPSE
1. Insert the tip of a screwdriver at the edge of the lens, pry
gently to remove the lens, and then remove the bulb from
the light holder.
OTE
● Wrap a cloth around the tip of the screwdriver to keep
from scratching the lens.
2. To install the bulb, perform the removal steps in reverse.
ECLIPSE SPYDER
1. Insert the tip of a screwdriver into the notch of the lens,
pry gently to remove the lens, and then remove the bulb
from the light holder.
OTE
● Wrap a cloth around the tip of the screwdriver to keep
from scratching the lens.
BK0098300US.book 70 ページ 2008年12月8日 月曜日 午前11時37分