13.5 Hard Copy Information
13.5.3 Display exmaple of hardcopy information
13 - 37
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
MAINTENANCE
TIME NOTIFICATION
SETTING
13.5.3 Display exmaple of hardcopy information
Display of the creation date and time
The creation date and time display is not updated even if a file is created or updated
while displaying the hardcopy information.
To display the updated creation date and time, close the screen currently displayed
(by moving to the upper hierarchy folder, etc.) and display the screen again.
Displayed folders and files
For the folders and files displayed, refer to the following.
13.1.5 Display file
Number Item Description
(1) Select drive
The drive which displays file or folder can be selected.
When CF card is not installed, [A: standard CF Card] and [B: Memory card]
are not displayed.
(2) Kind
Indicates whether the displayed name is file or folder.
In case of file, displays the extension; in case of folder, displays "DIR".
(3) Name
Displays the file name or folder name.
For the long file/folder name, entire part may not be displayed.
Confirm the nondisplayed part with the button, etc.
( 13.5.4 Copy operation)
After confirmation, touch the button to cancel the operation.
(4) Path name Displays the path name of drive/folder which is currently displayed.
(5) Size Displays the size of the file displayed in Name.
(6) Date and time Displays the creation date and time of each file.
(7) The size of drive
Displays the size in use and the entire size of the drive which is selected by
drive selection. (Only the size in use is displayed when selecting the C drive.)
(8) Operation switch Execution switch of each function.
(9)
Number of folders and
files
Displays the total number of the files and folders displayed.
(1)
(2) (3)
(4)
(5)
(6)
(7) (8) (9)
To Next Page
Loading...
Need help?
General
