Mitsubishi Q Series Connectivity Guide

Series HMI Connection Manual
V1.01 Revision November, 2011 135
Output Yb Y0 – Y1FFF Hexadecimal
Internal Relay Mb M0 – M8191
Special Internal Relay Mb M9000 – M9255
Format
Type
Bit No. (b)
Read/Write Range Note
Link Relay Bb B0 – B1FFF Hexadecimal
Annunciator Fb F0 – F2047
Timer Contact TSb TS0 – TS2047
Timer Coil TCb TC0 – TC2047
Counter Contact CSb CS0 – CS2047
Counter Coil CCb CC0 – CC2047
NOTE
1) Before using this communication protocol, the user needs to set communication module
via GX Developer programming tools. For more detailed information regarding the
setting method, please refers to Mitsubishi PLC User Manual.
2) The device address must be the multiple of 16.
3) The device address must be the multiple of 16 plus 9000.

Mitsubishi Q Series Specifications

General

Brand	Mitsubishi
Model	Q Series
Category	Control Unit
Language	English