EasyManuals Logo
Home>Mitsubishi>Engine>S6R-Y1PTA

Mitsubishi S6R-Y1PTA User Manual

Mitsubishi S6R-Y1PTA
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
vi
FOREWORD
(10) Add-on or modified parts that are not exempted by the Air Resources Board may not be used. The use of
any non-exempted add-on or modified parts shall be grounds for disallowing a warranty claim. Mitsubishi
Heavy Industries, Ltd. shall not be liable to warrant failures of warranted parts caused by the use of a non-
exempted add-on or modified part.
(11) The Air Resources Board may request and, in such case, Mitsubishi Heavy Industries, Ltd. shall provide,
any documents which describe that Mitsubishi Heavy Industries, Ltd.'s warranty procedures or policies.
(d) Warranted parts list.
(1) Fuel metering system
(A) Fuel injection system.
(B) Air/fuel ratio feedback and control system.
(C) Cold start enrichment system.
(2) Air induction system
(A) Controlled hot air intake system.
(B) Intake manifold.
(C) Heat riser valve and assembly.
(D) Turbocharger/supercharger systems.
(E) Charged air cooling systems.
(3) Exhaust gas recirculation (EGR) system
(A) EGR valve body, and carburetor spacer if applicable.
(B) EGR rate feedback and control system.
(4) Air injection system
(A) Air pump or pulse valve.
(B) Valves affecting distribution of flow.
(C) Distribution manifold.
(5) Catalyst or thermal reactor system
(A) Catalytic converter.
(B) Thermal reactor.
(C) Exhaust manifold.
(6) Particulate controls
(A) Traps, filters, precipitators, and any other devices used to capture particulate emissions.
(B) Regenerators, oxidizers, fuel additive devices, and any other device used to regenerate or aid in the
regeneration of the particulate control device.
(C) Control device enclosures and manifolding.
(D) Smoke puff limiters.
(7) Advances oxides of nitrogen (NOx) controls
(A) NOx absorbers.
(B) Lean NOx catalysts.
(C) Selective catalyst reduction.
(D) Reductant (urea/fuel) containers/dispensing systems.
(8) Positive crankcase ventilation (PCV) system
(A) PCV valve.
(B) Oil filler cap.
(9) Miscellaneous items used in above systems
(A) Vacuum, temperature, and time sensitive valves and switches.
(B) Electronic control units, sensors, solenoids, and wiring harnesses.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi S6R-Y1PTA and is the answer not in the manual?

Mitsubishi S6R-Y1PTA Specifications

General IconGeneral
BrandMitsubishi
ModelS6R-Y1PTA
CategoryEngine
LanguageEnglish

Related product manuals