Mitsubishi SCM125ZJ-S1 User Manual

-
13
-
'11 • SCM-SM-110
(b) Louver
Model SRK20, 25, 35ZJX-S, 50, 60ZJX-S1, 25, 35ZJR-S, 20, 25, 35, 50ZJ-S
Each time when you press the AIRFLOW

(LEFT/RIGHT) button the mode changes as follows.
Center installation
Remote controller
display
Right end installation
Left end installation
󱓻

Angle of Louver
Left Approx. 50°
Left Approx. 50°
Left Approx. 20°
Left Approx. 45°
Center
Left Approx. 30°
Right Approx. 20°
Center
Right Approx. 50°
Right Approx. 20°
Left Approx. 20° Center Right Approx. 30° Right Approx. 45° Right Approx. 50°
(Louver stopped)
(Swing) (Spot) (Wide)
Center installation
Remote controller
display

Angle of Louver
Left
Model SRK71ZK-S
Approx. 50° Left Approx. 20° Center Right Approx. 20° Right Approx. 50°
(Louver stopped)
(Swing)
(c) Swing
1)
Swing flap
Flap moves in upward and downward
directions continuously.
2)
Swing louver
Louver moves in left and right directions continuously.
Notes (1) Values in ( ) are for the model SRK25, 35ZJR-S, 20, 25, 35, 50ZJ-S.
(2) Values in
〔 〕
are for the model SRK71ZK-S.
(d) Memory flap (Flap or Louver stopped)
When you press the AIRFLOW (UP/DOWN or LEFT/RIGHT) button once while the flap or louver is operating, it stops swinging
at the position. Since this angle is memorized in the microcomputer, the flap or louver will automatically be set at this angle when
the next operation is started.
(e) When not operating
The flap returns to the position of air flow directly below, when operation has stopped.
In HEAT operation In COOL, DRY, FAN operation
Approx. 20°(25°)
ާ35°ި
ާ80°ި
Approx. 75°(70°)
Approx.5°(10°)
Approx. 60°

Mitsubishi SCM125ZJ-S1 Specifications

General

Brand	Mitsubishi
Model	SCM125ZJ-S1
Category	Air Conditioner
Language	English