8-67
AP7131>admin(network.wireless.wlan)> show
Description:
Displays the access point’s current WLAN configuration.
Syntax:
Example:
admin(network.wireless.wlan)>show summary
WLAN1
WLAN Name : Lobby
ESSID : 101
Radio : 2,4 and 5.0 GHz
VLAN : <none>
Security Policy : Default
QoS Policy : Default
admin(network.wireless.wlan)>show wlan 1
ESS Identifier : 101
WLAN Name : Lobby
802.11n (5.0 GHz) Radio : available
802.11n (2.4 GHz) Radio : not available
Client Bridge Mesh Backhaul : available
Hotspot : not available
Maximum MUs : 127
Security Policy : Default
MU Access Control : Default
Kerberos User Name :
Kerberos Password : ********
disallow MU to MU Communication : disable
Use Secure Beacon : disable
answer Broadcast ESSID : enable
QoS Policy : Default
For information on displaying WLAN infromation using the applet (GUI), see Enabling Wireless LANs (WLANs) on page 5-27.
show summary Displays the current configuration for existing WLANs.
wlan <number> Displays the configuration for the requested WLAN (WLAN 1 through 16).
To Next Page
Loading...
Need help?
General
