The timer is defaulted at 60 seconds, but it can be preprogrammed from 15 to 465 seconds, in
15-second intervals, or it can be disabled entirely for each radio mode, by a qualified radio technician.
NOTE: You hear a brief, low-pitched, warning tone four seconds before the transmission times
out.
Procedure:
1 Hold down the PTT button longer than the preprogrammed time.
You hear a continuous talk prohibit tone. The transmission is cut off and the LED goes out.
2 Release the PTT button.
The timer resets.
3 To re-transmit, press the PTT button.
The time-out timer restarts and the LED lights up solid red.
7.30.11
Time and Date Setup
The time setting is a 12-hour clock. The display shows 12:00AM. The default setting for the domestic
date shows MDY.
For more information, contact your system administrator.
7.30.11.1
Editing the Time and Date
Procedure:
1
or to Clck.
2 Press the Menu Select button directly below Clck.
The display shows the current setting of the radio.
3 Press the Menu Select button directly below Edit.
The first item blinks.
4 Perform one of the following actions:
•
or to change the selected item.
• or one or more times to move to an item you wish to change. or to change the
selected item.
• Press the Menu Select button directly below Exit to exit the screen without making any
changes and return to the Home screen.
5 Perform one of the following actions:
• Press the Menu Select button directly below Ok once you have finished to save your
changes and return to the Home screen.
• Press the Menu Select button directly below Cncl to discard all changes and return to the
Home screen.
MN001425A01-AW
Chapter 7 : Advanced Features
134
To Next Page
Loading...
Need help?
General
