a. or to Call .
b. Press the Menu Select button directly below Call .
c.
or to select the alias or ID, and press the PTT button to initiate the call.
If the target radio does not respond after a preprogrammed period, the display shows Send
page?.
d. To send the call alert page, press the Menu Select button directly below Yes . To exit the
screen without sending the call alert page, press the Menu Select button directly below No .
The display shows Paging...<Alias>.
If the call alert page is sent successfully, you hear a tone and the display shows Ack
received. The radio returns to the Home screen.
If the call alert page is not acknowledged, you hear a low tone and the display shows No
acknowledge. Press the Menu Select button directly below Ok to return to the main screen
of Contacts.
7.8
Recent Calls
Recent call menu allows you to view the recent incoming and outgoing call information.
You can view the information of the following type of calls:
• Call Alert
• Selective Call
• Private Call
• Phone Call (Outgoing Only)
• Emergency Call (Incoming Only)
NOTE: The Log Dispatch Calls Enable field need to be enabled in Customer Programming
Software (CPS) for your radio to log the dispatch call.
7.8.1
Viewing Recent Calls
Do one of the following to view recent calls. You can use the options interchangeably depending on
your preference and the programmed functions.
Procedure:
• Viewing recent calls using the preprogrammed Recent Calls button:
a. Press the preprogrammed Recent Calls button.
b. or to scroll through the list.
c. To view the recent Emergency calls, press the Menu Select button directly below Emer.
Press the Menu Select button directly below All to view back all recent calls.
d. To return to the Home screen, press the Menu Select button directly below Exit, press
or the PTT button.
• Viewing recent calls using the radio menu:
a. or to Rcnt.
MN001425A01-AW
Chapter 7 : Advanced Features
68
To Next Page
Loading...
Need help?
General
