Related Products Motorola MBP36XL
• lf the baby unit is too far away it may be out of range, so move the Baby Unit closer to the
Parent Unit.
• Make sure the Baby and Parent Units are not near other electrical equipment, such as a
television, computer or cordless/mobile telephone.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi® routers), Bluetooth™
systems, or microwave ovens, may cause interference with this product, so keep the baby
monitor away at least 1.5m (5ft) from these types of products, or turn them off if they appear
to be causing interference.
• If the signal is weak, try moving the Parent and/or Baby Unit to different positions in the
rooms.
What can I do to make the batteries last longer?
Related Products Motorola MBP36XL
We would advise to use the parent unit on mains power wherever possible and only to use
battery power for moving to another position where the mains power can be re-connected.
However there are ways in which you can extend the battery usage. Adjusting the brightness to
a lower level, and using lower volume levels will help to extend the battery life. Also in battery
mode if you use the shortest (5 minute) power saving mode setting then the display will turn
off after 5 minutes but the audio will still carry on working, and then when you want to re-
activate the video just press any button.
Why has the picture on my screen changed to black and white?
Related Products Motorola MBP36XL
• The Baby Unit may be in a darkened room, which causes the infra-red illumination to turn on
and the picture image to change from color to black and white. When the light increases in the
Baby Unit room, the picture will return to color.
Why does the parent unit beep?
Related Products Motorola MBP36XL
The battery in the Parent Unit may be running low. Connect the Parent Unit to the mains power
with the supplied power adapter for recharging.
Why is the Power Indicator on the Parent Unit not coming on?
Related Products Motorola MBP36XL
To Next Page
Loading...
Need help?
General
