Motorola SB5101 - SURFboard - 30 Mbps Cable Modem User Manual

Notes Power Receive Send Online
PC/
Activity Standby
A
Power On
B
Downstream Scan
C
Upstream Range
D
Network Connect
E
PC/Network Activity
F
Standby
*
G
Power Off
H
Network Access Off
I
Firmware Upgrade in
Progress
Modem Power-on Self Test (POST). If LED remains blinking, faulty modem.
Modem scanning downstream frequencies.
Modem scanning upstream frequencies.
Downstream and Upstream acquired. Modem processing for DHCP,
TFTP, and TOD.
Modem operational. PC/Activity is solid when a CPE is connected
and blinks when transmitting or receiving data.
“Standby” switch enabled. Modem successfully completed boot
sequence and all LED’s blink off, except “Standby”.
Modem powered off.
Modem is successfully registered but Network Access Control is
disabled via DOCSIS
®
Configuration File.
Modem has successfully registered and is processing a firmware upgrade.
SURFboard
®
SB5101 Cable Modem LED Status
SURFboard
®
SB5101 Cable Modem
A
B
C
D
E
F
*
G
H
I
- On - Off - Flashing
* Standby not available on all models

Motorola SB5101 - SURFboard - 30 Mbps Cable Modem Specifications

General

Brand	Motorola
Model	SB5101 - SURFboard - 30 Mbps Cable Modem
Category	Modem
Language	English